How To Connect The Saboopher To The Silenor

Steps

1. Determine whether the " bridge " sabotage can be safely connected to the forcer. The security we're talking about here is the question of impedance or resistance. Start with an impedance for two saboophers you want to connect the bridge. For example, if each of your saboophers is designed for 4 Om, they will only have a total resistance of 2 Om with a bridge connection. If your surgeon isn't designed for 2 Om, it's not safe to use this system; your force will try to give a lot more power than it can, and it'll be overheated quickly.
2. Install the necessary wire. For the bridge 2 SVC (single voice coil), the sabvophere using a single-channel force will require two positive (red) wire stereo and two negative (black) wire stereo.
3. Reinforce the wire force with the first saboopher. Stick the wire to the first dynamics, as usual, starting with the connection of the red wire from the positive strap to the positive dynamite. Then connect the black wire from the negative klem on the assiliator to the negative clement on the column.
4. Stick the wire to the second saboopher with the first saboopher. For the bonnet connection of the second dynamic with the first, extend the red wire between the positive klemms on both dynamics and the black wire between the negative klemms. The first saboopher shall then divide both of its cells with two wires, as it is connected to both the silenor and the second dynamic. The Sabbfers are now connected to the bridge.